Sky Dolphin RC airplane

thingiverse

An extremely versatile RC 3D printed airplane. These are the stl files to the fuselage parts. Designed to be light and easy to print and assemble, the goal of this plane is improvement. This extremely functional fuselage can be used to test loads of different kinds of wings while allowing the pilot to enjoy a variety of different flying styles. This airplane's  original intent was to have an excellent platform for trying out new wings without needing to build a new fuselage for each different wing type. While it was first designed to be a motored glider's fuselage, it can be used for lots of different purposes. An adjustable strap for holding down your wing is what permits for varying wing dimensions. The beauty of being able use lots of different wings is that every time you go flying, you can have a different flying experience. Great for a first 3d printed airplane and for an expert flyer. The stl files can be purchased for a few dollars: https://payhip.com/JustFly Included: Stl files for all printed parts of the fuselage Recommended print settings & electronics Assembly overview with pictures Tips for construction Specs: total length without motor (when assembled): 27 in, or 68.5 cm width of fuselage: 1.75 in, or 3.5 cm Required materials for assembly of printed parts: One 6mm inner diameter x 8mm inner diameter x 550 mm carbon fiber tube (the outer diameter is most important) -lighter is better Super glue and/or hot glue Recommended electronics: 450 mAh 70c 2s lipo battery 2280KV brushless motor 12 amp esc small reciever compatible with a remote that is at least 3 channel servos -roughly 4-5 grams each Please share this with others and post images of your builds!