SkrPi Electronics Case for 3D Print Enclosures V1.2.5

prusaprinters

<p>1.2.5 Updates to the SkrPi are as follows.</p><ol><li>Improved air vent optimized to reduce overhang on the print.</li><li>Reduced mounting angle on corner mounts.(Also for printability)</li><li>Internal intake cover (Also also for printability)</li><li>Zip tie slots for wire management</li><li>Power button cover plug for those who don't need it.</li><li>Slightly expanded dimension on the x axis for wire management&nbsp;</li></ol><p>The rest is the same as version 1.2 info below.</p><p>The SkrPi is an electronics enclosure that is <strong>designed to be mounted under an enclosure</strong> and still give access to usb and sd on both mainboard and the pi.</p><p>The hole patter fits skr mini boards and original creality ender boards where an skr is a drop in replacement.</p><p>This Pi mount was designed for the pi 3b+. However, the screw pattern for a pi 4 is the same. Just keep in mind that the IO on a pi 4 is different and you may need to alter the front ports if you need pi 4 support.</p><p>Fan mount fits a 4010 fan so stock ender fan will do fine.<br>Horizontal fan mount reduces case height which decreases footprint, print time and reduces the volume of air that needs to be moved.</p><p>Offers stackable buck converter trays.(Stackable with bolts)</p><p>Enclosure mounting holes are 3mm with up to 6mm bolt head clearance.</p><p>&nbsp;</p><p>Enjoy!</p>