Skrillex Huawei W1 Case

thingiverse

This multi-colored case can be printed on a printer equipped with a single Extruder, or it may also be printed by a printer featuring dual extruders. To print this case using one extruder, you need to slice each part separately. To position the logo on the printer bed, utilize the case file. You can center it in your slicing software and use it as a reference for positioning the other parts, then remove it before slicing. After slicing, you must modify the code. The printer should print two layers of one color, followed by two layers of another color, and so on. (Two layers worked with my k8200 printer; however, you may need to use one layer with other printers.) For this, you need to remove unnecessary layers from the code. Be sure that you only removed the code for the layers and no other critical commands. After preparing the codes, printing can begin. First, print two layers of the case, then print two layers of the logo, and so on. This may be a bit time-consuming, but the outcome is well worth it. These steps are very challenging! When there is already an object in the printer, your printer may experience a crash. Set the speed level very low. It worked fine with my Velleman K8200 printer; however, it might not work as expected with other types of printers. Print Settings: Printer: Velleman k8200 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Notes: The models contain all necessary supports to ensure proper printing.