SKR V1.3 TFT V2.0 Enclosure

thingiverse

The goal behind designing this enclosure was to create a compact and easily printable layout that minimizes overhangs. All entrance holes are aligned with key connection points on my Bigtreetech SKR V1.3. I've also made sure there's access for both SD cards and the USB port. The dimensions of the outer casing measure 96mm x 145mm. To verify its fitment, I printed a prototype using my printer and confirmed it fits perfectly. I borrowed the models from here: https://www.thingiverse.com/thing:3701548 for SKR V1.3 and here: https://grabcad.com/library/bigtreetech-tft3-5-v2-0-touch-screen-1 for TFT35 V2.0. However, my Bigtreetech TFT35 V2.0 had the push button positioned slightly lower than the model I downloaded. To accommodate this, I offset the hole a bit lower to ensure it fits perfectly. It's essential to measure your touchscreen and verify that it will work with this design. If necessary, you can trim the excess material for a snug fit. This enclosure is designed specifically for my printer to house the kit from Amazon: https://www.amazon.com/gp/product/B07WH6P9RC/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1. To improve airflow, I've redesigned the fan entrance and exit to accommodate an inlet filter. You can purchase the fan covers here: https://www.amazon.com/gp/product/B07WH6P9RC/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1. For the fans, you can refer to this link: https://www.amazon.com/gp/product/B0757RPCN9/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1. Most 40mm fans will work with this design, but thicker ones may need to be mounted outside the enclosure.