
SKR-V1.3, Ramps 1.4 and Rumba Enclosures for V-slot
thingiverse
The original design is great, but I wanted to add more room for playing and improve accessibility for changes. The original size is 120x80mm, with a height of 60mm. Much of it is simply an imitation of the spauda01 box, so why spoil a good thing? For better accessibility, I added cable slots with different sized slides. Update (9-13-17): I replaced the boxes with leaner cable slots that use 37% less filament. New measurements are 130x115x99mm and 130x115x77mm. They remain sturdy around the cable slots and have a similar main structure, but the bottom and walls are thinner in many places, with a minimum thickness of 1.6mm (using a 0.4mm nozzle). Two mounting points are enough. As before, the 99mm version is intended for adding a CNC shield or mount. I made room for wires under the Ramps and the reset button is now easier to use via the "reset-button.stl." Theoretically, you could cut an M3-thread in three print supports, but it's not easy to reach. You can use nylon bolts if needed. I didn't change the version with fixed cable holes (150x112x70mm), as I don't use it myself. If anyone wants a leaner version, please let me know and I'll see what I can do. The CNC-shield in the picture is not connected; just there for show. Colored blocks represent maximum room needed by p.c.'s with wires plus fan. After printing, I made rear ventilation holes higher and thinner (more flesh between holes). It prints nicely with "touching bed" support in curaengine, easy to remove. I removed most of the history from this text; it's the ultimate version for me, at least. Keep it open a little while as a work in progress. Edit (10/21/17): Tinkered with ramp-supports -> Ramps-box...-v1.stl. Edit (07-03-18): Added Rumba box (156x126x69mm) with cable slots and pillared cover. If anyone wants a similar box for the Bigtreetech-gen-V1.0 board, ask for it. That board was very short-lived with me; don't use usual connectors for motors. Design is there for whoever wants it. Edit (11/05/18): Putting Rumba box high up vertically and shortening many wires; need to secure the rumba itself. Found it's impossible to make a M3 thread in print support with that hole using my tools. So, I added a Rumba version with a little hole in the bottom which you can enlarge to ø2,5mm and then thread it upwards for M3. Leave both versions here; decide which one you like, but strongly advise considering this version. Removed box without cable slots; too fat anyway. Edit (09/11/18): Small correction in Rumba cover. Edit (10/11/18): Added Rumba-box with Cover for external 120mm fan; incompatible with other rumba-boxes. Edit (09-11-19): Added SKR-V1.3_box (143x126x69mm) on request of jskala. Haven't printed it, but he said it fits well. Edit (04-dec-19): Added covers for 80mm fan for the SKR-box and Rumba box. Both covers have heightened edges and fit on existing boxes. Used holes instead of pillars for mounting fans; less neat but more practical, I feel. Print Settings Printer: D-Bot Core_XY in Threes Rafts: No Supports: Yes
With this file you will be able to print SKR-V1.3, Ramps 1.4 and Rumba Enclosures for V-slot with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SKR-V1.3, Ramps 1.4 and Rumba Enclosures for V-slot.