SKR Pro 1.1 board to CR-10s control box

thingiverse

This is an adapter for installing a Bigtreetech SKR PRO 1.1 motherboard in the original CR-10s case. The 50mm internal fan is reused. Can be compatible with other printer / motherboard but not tested. List of equipment for installing the SKR board - 1x Bigtreetech SKR PRO v1.1 - 1x Parallel Z adapter (optional) - 4x M3 screw 6mm (Reusing the screws that hold the original card to the case. If you are using other screws, check that the head is not too high to avoid short circuits.) - 6x M3 8mm screw (-2 if you do not use the parallel Z adapter) - 6x M3 nut (-2 if you do not use dual Z adapter parallel) List of equipment for installing the fan - 1x 50 mm fan (reuse it original or a quieter one) - 4x M3 screw 10mm (to attach the fan to the bracket - 2x M3 screws 4mm (to fix the adapter in the bottom of the case - reuse the screws of the original support) - 2x M3 nuts August 11, 2019 - CR-10s to SKR pro 1_1 - Adapter v1.0.stl -> Adapter 1st version - CR-10s to SKR pro 1_1 - Spacer v1.0.stl -> Spacer 1st version - CR-10s to SKR pro 1_1 - Fan Bracket_v1.0.stl -> Bracket for fan 1st version August 18, 2019 - CR-10s to SKR pro 1_1 - Adapter v1.1.stl -> Adjustment of some measurements, create a notch in anticipation of the external adapter. - CR-10s to SKR pro 1_1 - FacePlate v1.0.stl -> Added an adapter for the outside of the box. August 24, 2019 - CR-10s to SKR pro 1_1 - Cut template v1.0.stl -> Adapter for drilling. Please validate if compatible with your printer before cutting since some modification could be done from one version to another. My CR-10s was manufactured in early 2018. If you like this design please consider to leave a tips. I worked many hours to design and test fit this adapter.