SKPang PiCan 2, PiCAN Duo Box, both versions (isolated and not)

thingiverse

Simple Box for Raspberry Pi with SKPang PiCan 2 Mounted. Since I couldn't find one, I made this myself. After a short period of use, we noticed that the PI was getting hot, so I added some slots at the top to allow for ventilation. I highly recommend coating the PI and the PiCan with a conformal coating if you plan to leave it in a vehicle for an extended period. I also made a small cut-out to make it easier to remove the SD-card if needed. The box is designed for M2.5 screws, with M2.5x6mm screws for the bottom and M2.5x18mm screws for the top. I added small bushings in case you don't have the correct hardware. Simply use a threaded rod and the bushings between the PCBs. It may be a bit fiddly to get in place, but it's an option if you don't have 11mm stand-offs. If you don't have the optional buttons, there is a lid without them. If you do use the button option, I recommend printing it in a different color because the button is not very easy to see. This is recommended if you're using this as a CAN sniffer and want to record an event as it happens. You won't want users to miss the button. Links to the CAN hats/shields: http://skpang.co.uk/catalog/pican2-canbus-board-for-raspberry-pi-23-p-1475.html or http://skpang.co.uk/catalog/pican2-canbus-board-for-raspberry-pi-23-with-smps-p-1476.html The Isolated Duo box is now fully tested and fitted. Link to the Isolated Duo hat/shield: http://skpang.co.uk/catalog/pican2-duo-isolated-canbus-board-for-raspberry-pi-23-p-1482.html Since the bottom is different for the duo than for the PiCan2, you'll need to print the matching top and bottom. The Duo box is fully tested and fitted. Links to the Duo hats/shields: http://skpang.co.uk/catalog/pican2-duo-canbus-board-for-raspberry-pi-23-p-1480.html or http://skpang.co.uk/catalog/pican2-duo-canbus-board-for-raspberry-pi-23-with-smps-p-1481.html