Skeletor Live Love Laugh meme coasters

prusaprinters

<p>These coasters are great conversation starters and are way too much fun not to print them. There are 4 diferent models but its best to print one of each for a better understanding of the meme.</p><h3>PRINT SETTINGS</h3><p><strong>Supports:&nbsp;</strong></p><p>No need</p><p><strong>Raft:</strong></p><p>Doesnt matter</p><p><strong>Resolution:</strong></p><p>0.2 mm</p><p><strong>Infill:</strong></p><p>From 20% to 100%</p><p>i recommend 100% for the details, the base can be 20% or even less.</p><p><strong>Notes:</strong></p><p>You have to arrange averything togheter in your slicer, so, base is 2 mm high but the rim is an extra 1 mm so in your slicer it will appear as height 3. the black part of the skeletor coaster is 0.4mm high, the yellow part (skeletor.stl) is 0.6mm high, as for the live love laugh coasters, the white parts are 1 mm high.</p><p>Arrange every part in your slicer making sure that the height is correct and you disabled the supports option</p><p>In order to print it correctly you have to follow these steps once you sliced everything in their correct place:</p><ol><li>Print the base</li></ol><p>&nbsp;<i><strong>Make sure to enable z hop (at least 1 mm) after you printed the base, otherwise your nozzle will melt a line on the outer rim of the base once it reaches the correct height!</strong></i></p><ol><li>Without removing the base print the second color, if you are printing the live love laugh ones, your print ends here!</li><li>If you are printing the skeletor coaster, print the third and last part (skeletor.stl) without removing the coaster</li></ol><p>You can skip all this if you print everything separatedly and then superglue it piece by piece, but i personally like to print everything in place and avoid any superglue residue that could mess the look of the coaster.</p>