SKADIS top shelf with border

prusaprinters

<p>Printed a top shelf for SKADIS for a square clock.</p> <p>Its "shelf depth" not including the border is 66.8 cm and width 63.2 cm (without border and slant).</p> <p>After printing I've realized you don't technical need the "hook" part. so I've included a version without it. It just slides snugly on the top and is supported by the trianglular support.</p> <p>If you do print it with the hook - careful not to brake it off: first put the hook in the whole, pull the whole thing up and slide it over on top.</p> <p>The sample shown in the picture is smaller than the clock, but fits well enough that I did not reprint. The model included was adjusted to match the size, but I could not be bothered printing another.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15</p></div> <p><strong>Filament:</strong> eSun PLA+ White</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Print it on its side. Add support for the "bottom" part of the shelf.</p></div> How I Designed This =================== <p>The "remix" here is I took the bottom hook part and removed the top adding my own shelf.</p> <p>I've added slants on the sides to avoid a need for support when printing on the side.</p> <p>You can adjust any sized in tinekcad:</p> <p><a href="https://www.tinkercad.com/things/hwDYiFMYkwt-skadis-square-shelf-clock-holder">https://www.tinkercad.com/things/hwDYiFMYkwt-skadis-square-shelf-clock-holder</a></p> </p></p></p> Category: Organization