SK-Tank CF Dual 5015s LGX-Dragon Mount

thingiverse

This is a mount for the Bondtech LGX and Phaetus/TriangleLab Dragon hotend, for the Seckit SK-Tank with the carbon fiber X gantry. It includes support for dual 5015 blowers for part cooling, and mount points for a Z probe. I've included a mount for the Euclid probe. I found that I needed a longer X endstop finger, because this midplate has a shoulder that will hit the XY joiner with the old finger. The longer finger is also better because the LGX puts the nozzle in the center, whereas with the BMG it is offset to the right (+Y direction). The longer finger keeps the zero X position for the nozzle more or less at the edge of the bed. The 5015 fans should be inserted into the midplate sockets from above at the front edge, then rotated back and seated fully. Then they should be attached to the LGX with an M3 screw with some washers in between. The fan duct is sized for the Dragon and because the nozzle is centered, you can just mirror the duct in your slicer to print the second duct. The ducts pop into the midplate below the fan and should stay in place with friction. This design is just for the midplate plus part cooling and Z probe mounts. The actual component to mount the Dragon to the LGX is [here](https://www.thingiverse.com/thing:5333951), by smnz.