SJRC - water landing kit

thingiverse

Drone SJRC - water landing kit In what situation will such a kit work? If we want to film a body of water and suddenly the power fails, the drone will fall into the water, but will not go to the bottom. The project was created for SJRC F11s drone model (maybe it will fit the F11, F22, F22s oraz RUKO drone model). The project consists of the following elements: 1) Drone SJRC - water landing kit - frame.stl (we print 1 piece). 2) Drone SJRC - water landing kit - mount.stl (we print 4 pieces). Additionally, I have included 2 test files of the latch: 1) test - mount.stl 2) test - frame.stl Before printing the main STL files, I suggest to test the latch (test - mount.stl ; test - frame.stl) to check the operation of the latch. "Foam Noodle" parameters: - length: 300 mm - diameter: 64 mm The diameter of the rim to mount the "Foam Noodle" is 59 mm After printing the design, we mount it using 2 cable ties (length 350 mm, width 3.5 - 4.0 mm). If you have any questions or suggestions - write to me (e-mail: jasiuw44@tlen.pl) Ps. Duplicate STL files are identical (you can download any STL file). Supports must be generated that are very minimal so that they can be easily removed (see example photos - supports are marked with a red frame).