Sirians 3-inch FPV Frame Accesories & Mounts

thingiverse

These are my accessories and mounting parts for my micro 3-inch FPV frame called Sirians 3. It is a generic 3-inch frame and may goes with other names on other parts of the world.Please note that I'm now using a 20mm height stand-offs for the frame to make it a bit more compact. The height goes uniform across all mounts on this design.Also, no Action Cam mount on this design, because i don't intend to use any action cam on such mini frame, only for bashing around.FPV Camera MountIt is a remix from DanRichmond's design, scaled and redesigned to fit 14x14mm Nano FPV cam.It consists of 2 parts, left and right, both are mirrored to eachother.Landing GearJust a generic landing gear to fit the motor mount. I believe i sourced it from a design here on Thingiverse, but so sorry I failed to trace it back to where i found it. Credit goes to the original designer.Print 4 pcs, each for each arm.VTX MountBasically, just a 20x20mm to 16x16mm adapter since I'm using a 16mm form factor VTX, only divided into 2 parts so that cables can be routed between the gaps to keep it tidy.RX MountAgain, just a regular 16x16mm plate that you can stack above the VTX Mount to stick your micro receiver to it. I did this simply to avoid the heat generated by the VTX from directly affect the receiver by giving it some (minor) distance. Use spacers/gummy to set the distance as you required.Rear Plate/Stand-offThis part gets a little busy. It accommodates a XT30 mount, a TBS Crossfire Immortal T antenna, and a VTX antenna.The VTX Antenna I'm using is the Flywoo Atomic Antenna, so you may need to re-adjust the mounting holes to fit yours.This part still needs a 20mm metal stand-off to be attached into the frame. I'm using a 20mm M2 knurled type stand-offs.It can be modified to fit a mini GPS Module, but since I'm not using one so I don't design one.Note that you can also attach part no. 4 (RX Mount) on upper section of this part to give it more clearance from your VTX.