SINoALICE - Snow White/Breaker Blade

cults3d

This model is designed for Snow White/Breaker cosplay from SINoAlice. It is cut into 25 pieces to fit in a printer with platform size of 200mm x 200mm x 200mm. All the pieces come with flat face that can lay on the printing bed easily. There is a picture of pieces labelled to their file names in the preview section where you can refer to. I included an uncut version as well just in case you want to cut it yourself. For pieces 2, 8, 9, 10 and 11 are suggested to print in upward position to avoid using any support. To make sure they are held well on the build plate, a brim is recommended. For the other pieces, if you wish to reduce the amount of "staircase" artifacts on the surface, you can print them in upward orientation as well with longer printing time and more support needed as a trade off. There are tunnels of 10mm and 14mm diameter punch on the model for bone installation and alignment purpose. If you can't find anything that can help you with alignment, you can print the pegs file included. "Peg" is a cylinder with 9.5mm diameter while "Peg13.5" is a cylinder with 13.5mm diameter. Once printed, glue the pairs with a and b together to for a part using superglue or other suitable adhesive. Join all the parts afterwards. For scaling, please use the same scale factors for all the pieces. Cheers and Happy Printing!