Single Lithophane Lightbox 8x8cm

cults3d

I was looking for some nice, easy to print, single lithophane boxes but couldn't find any.. So I decided to design my own! 💪🏻 I'll give this one to you all for free 😁 If you like this design, feel free to support me so I can keep creating new and better designs This box is designed to fit a lithophane with the following dimension: Height: 80mm Width: 80mm Border thickness: 4mm Border width: 2mm There is a clearance of 0.4mm calculated in the model. So with a lithophane thickness of 4mm it should slide in very easily. If it doesn't, you should sand of some of your lithophanes elephant foot to make it fit ;) The top of the box also has enough clearance to make a near perfect fit, but always keep in mind that every printer is different.. so you might need to tweak some of your settings to make it fit. Box dimensions are: 90x90x60 mm The box can easily be fitted with a little piece of LED light strip. The box has an 4mm opening at the back where you can pull trough the wires of the power source. I've used a LED strip with 60 LED/meter but for this box I only use 3 LEDs. I chose a USB-cable with dimmer as the power source so you can use it with a powerbank or a phone charger. LINKS link link Solder the wires to the LED strip, fit the led strip in the box, plug in power source and enjoy your lithophane lightbox 😁 If you've got any questions feel free to leave a comment! UPDATE 1: Added another box design with a 8mm opening in the back. You can pull a single color ledstrip trough it. So you don't have to solder anything if you don't like to 😉 just cut the LEDstrip and stick it to the box.