Simplify E3DV6 mount. Ender 5

thingiverse

A Set of Highly Effective and Simple E3D V6 Mount System for Creality Ender's Series Printers. The Features and Advantages: - A Very Strong Mount for the E3D V6 Hotend with an Integrated 4010 Stock Part Cooling Fan at Front. - The Heavy Heatsink Fan Mounts Directly to the Frame, Has No Contact with the Hotend, and No Longer Rides or Vibrates the E3D V6 Hotend. - "Dragon Fang" Part Cooling Fan Air Duct Provides Strong and Wide Air Flow. - Very Light Weight, Approximately 17 Grams, Allowing for 2 Times Higher Acceleration. - An Ability to Mount BLTouch. It Consists of 5 Parts: 1. E3D V6 Base Mount (4 Perimeters 35% Infill, 1mm Top and Bottom). 2. E3D V6 Clamp (4 Perimeters 35% Infill, 1mm Top and Bottom). 3. E3D V6 Heatsink Fan (Heatsink Fan_sunon_high.stl). 4. Part Fan Blower - Known as "Dragon Fang". 5. 2 Pcs Small Round Inserts to Correctly Mount 4010 Fan. 6. 5015 2 Sided Blower for Volcano - Not Yet Ready, Waiting. You Can Choose V6 Mount with BLTouch. I Designed It According to Official BLTouch Mount Recommendations. BLTouch Offsets, Mm: X = 29 Y = 0 To Improve Looking of the 4010 Fan and Increase Some Air Flow, I Recommend Printing This Ring: https://www.thingiverse.com/thing:3813567 To Assemble "E3D V6 Base Mount" We Need 2 Pcs M3 Brass Inserts (Pics for Reference). And 2 Pcs M2.5 Brass Inserts Are Also Needed for V6 Clamp to Mount 4010 Fan. Install It with a Hammer. "Dragon Fang" Mounts with 2 Pcs Stock M2 x 10mm Screws. It Has Very Thin Walls at the Tip, 0.8mm and 0.4mm. Apply Cold Solvent Vapor for 30 Minutes. Little Supports Need for Base Mount and E3D V6 Heatsink Fan. You Can Use Any Kind of Plastic You Like. The Total Weight of These 4 Parts Is Approximately 17 Grams, Including 4 Brass Inserts. It Should Easily Fit on All Creality Ender's Printers 2, 3, 4, and 5. But It Was Designed for Ender 5. Try It - A Great Improvement in Print Quality Awaits You! Last Update: 30.09.2019