Simplify 3D Configuration Files for HyperCube/CoreXY

myminifactory

This is just the configuration files for Simplify 3D users who want to use it with their HyperCube or CoreXY printers. I was forced to have at least one STL file so I found a little frog like the one S3D uses for their website, which you may safely ignore. I use Simplify 3D as my slicer and printer controller for my HyperCube printer. Attached are my Factory File and my FFF Printer File, both specifically designed for the HyperCube. They're not perfect, but they provide a great starting point for your own HypeCube Printer setup. First, import the FFF file, which outlines the essential printer parameters. Next, load the Factory file directly into Simplify 3D. If you need to make changes to the Factory file, save them on your computer for safekeeping. However, to save a FFF file, you'll need to export it. Remember to enter the correct build size for your HyperCube printer and double-check other critical parameters like extruder nozzle size and desired temperatures. The start script automatically homes the printer and then extrudes a 40mm bead in the front left corner to prime the filament flow. You can easily modify this script to suit your unique needs. I've also included an end script for added convenience. If you discover any areas where I could have done better, please let me know, and I'll promptly address them. This configuration will be continuously updated with the latest improvements and enhancements. Update 2/8/2017: After encountering issues with the prime extruder in the start script, I made a crucial adjustment by adding a zero position for the extruder. This simple fix resolved the issue of the extruder sometimes moving backwards. The revised start script now includes a brief extrude in the front left corner to prime the extruder before printing begins.