Simplified Claptrap

thingiverse

This thing was created using Tinkercad. Edit it online at https://www.tinkercad.com/things/90g6NCZYCQa Print Settings: Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: Yes Resolution: .1 Infill: .25 Notes: layer_height = 0.1 first_layer_height = 0.25 perimeters = 3 avoid_crossing_perimeters = 1 extra_perimeters = 1 start_perimeters_at_non_overhang = 1 top_solid_layers = 5 bottom_solid_layers = 3 fill_density = 0.25 infill_type = TRIANGLES only_retract_when_crossing_perimeters = 1 infill_speed = 40 perimeter_speed = 40 external_perimeter_speed = 35 support_material_speed = 40 bridge_speed = 60 min_print_speed = 6 travel_speed = 300 first_layer_speed = 50% fill_angle = 0 infill_overlap_perimeter = 0.06 bottom_clip_amount = 0 skirts = 3 skirt_distance = 0 min_skirt_length = 2 center_part_on_bed = 1 first_layer_extrusion_width = 0.4 support_material_extruder = 1 bed_size = 280,280 print_center = 0,0 z_offset = 0 bed_shape = circular gc_code_output_type = REPRAP z_can_be_negative = 0 start_gcode = M104 S{temperature} M190 S{bed_temperature} M109 S{temperature} G28 end_gcode = M104 S0 ; turn off temperature M140 S0 G91 G1 Z10 E-5.0 F12000 G90 G28 M84 ; disable motors pause_gcode = G91 G1 Z10 E-10 F12000 G90 resume_gcode = G91 G1 Z-10 E10.8 F12000 G90 cancel_gcode = M104 S0 M140 S0 G28 M4 nozzel_diameter = 0.5 retract_length = 6 retract_lift = 0.5 retract_speed = 110 reatect_before_travel = 5 min_extrusion_before_retract = 1.5