Simplex Ciniwhoop

thingiverse

This is a remake of the Whirlygig Ciniwhoop, designed as one entire piece for printing.\r\n\r\nThe original design can be seen at https://www.thingiverse.com/thing:4321086.\r\n\r\nThis model is optimized for the following hardware components:\r\n\r\n* A 14 mm wide FPV camera, specifically the Runcam Racer Nano.\r\n* Brushless motors no taller than 20 mm in height, such as the Xing 1105 or 1204.\r\n* The SucceX F4 2-4S 12A AIO Whoop Flight Controller.\r\n* The SucceX Whoop VTX with adjustable power settings of 25/100/200mW.\r\n* 3-inch bi or tri-bladed props for smooth flight performance.\r\n\r\nFor a demonstration of the Whirlygig Ciniwhoop in action, please watch the maiden flight video at https://youtu.be/1YPUoP2Z_hc.\r\n\r\nNote that this model prints upside-down and includes a provided .STL file with 15% infill and a resolution of .2 mm. The estimated print weight using PLA is approximately 30-40 grams.\r\n\r\n**Update**\r\n\r\n12-01-2020: A new build, labeled V2, has been added to Rotorbuilds at https://rotorbuilds.com/build/25396.\r\n\r\n10-31-2020: Updated files have been provided. To access the updated files and thread discussion on Rotorbuilds, visit https://rotorbuilds.com/build/25148.\r\n\r\n11-17-2020: A variant with a honeycomb wall has been created to further reduce weight.