Simple Tube Stand

prusaprinters

<p>Simple tube stand designed to minimize filament usage.</p><p>fits 3 tubes &lt;30mm diameter 70+mm tube height.</p><p>If you need it to be taller or shorter, the supports can be modified to the necessary height.</p><p>Print Settings:</p><p><strong>Settings for top/bottom plate</strong></p><p>Position plates so that support holes are facing the print bed.</p><p>Supports: Build plate only</p><p>Infill: 10% honeycomb, try the other infill patterns to see what you like.</p><p>Layer height: 1.5mm</p><p>Perimeters: 4</p><p>Layers: top/bottom 0</p><p><strong>Settings for supports</strong></p><p>Infill: 15%</p><p>Layers: top/bottom 5</p><p>Perimeters: 5</p><p>Layer height: .1mm</p><p><strong>supports and baseplates can be printed together. just select the supports and add infill and layer settings.</strong></p><p>&nbsp;</p><p>&nbsp;</p><p><strong>MAKE SURE TO CHECK CHEMICAL REACTIVITY BEFORE USING THIS STAND WITH ANY CHEMICALS. I USE PLA FOR USE WITH 70% NITRIC ACID.&nbsp;</strong></p><p>&nbsp;</p><p>&nbsp;</p>