Simple table cloth holder

prusaprinters

<p>We have a pretty thin garden table of only 12 mm thick.</p><p>I could not find a table cloth holder that would fit nicely around it.<br>So I quickly drew up a simple table cloth holder.<br>I etched my logo in to spice it up just a little.<br>If you don't like the logo, turn them around so the logo is under the table :)</p><p>By mistake a first made one which was 18mm thick, and was too loose for our table.<br>Then I scaled it down to 14 mm, which fits our table perfectly.<br>I added both of them, perhaps the 18mm fits someone else better.</p><p><strong>Printing instructions</strong><br>Printing is easy, no supports needed, I used a 2mm brim to prevent the model from coming loose from the bed.<br>I used 100% infill, since it is such a small model and you want it to be tough.</p><p>I recommend PETG for outdoor use and the bit of flexibility you need, so they don't break.<br><br>Let me know if you like the model or want something changed!</p>