Simple Standing Photo Frame

prusaprinters

<p><strong>Introduction</strong><br>I designed this simple photo frame to hold a 15x10cm photo on my desk and wanted to quickly share it on here in a few different sizes and orientations. Have a look at the “Assembly” model in the 3d viewer to see the whole thing.<br>&nbsp;</p><p><strong>Printing Tips</strong><br>I printed mine in PETG, with a 0.25mm layer height, and no supports. Print the model face-down, as in the 3rd photo, so no supports are required!<br>&nbsp;</p><p><strong>Assembly Tips</strong><br>My design has 2 parts, the frame, and a ‘retainer’ plate that holds the photo in with a friction fit - I added a dab of CA glue (super glue) in the corners as an extra measure.<br>&nbsp;</p><p><strong>Additional Tips</strong><br>To get the exposed infill pattern on the retainer as in the photos, adjust your print settings to print no top or bottom horizontal infill layers. Adjust the infill type and density to achieve the desired effect. You can also use a box-modifier to remove the top and bottom infill layers, leaving only some infill around the edges, as in the example print in the photos.</p>