Simple Spice Rack (Low Material Usage)

prusaprinters

<p><strong>Model Description:</strong></p><p>This is a set of shelves that hold small tins of spices. &nbsp;There is space for six spice tins per shelf with a total of four shelves by default. &nbsp; To keep the print easy to print with no need of supports I have detached the legs from the shelf.&nbsp;</p><p>My goal in this, was to design a simple shelf that didn't use a lot of material, while remaining strong and fully functional</p><p>Please post your makes and comments!</p><p>&nbsp;</p><p><strong>Spice Tin Dimensions:</strong></p><p>The spice tins that I have designed this for are the Kroger tins with the following dimensions.</p><p>Height: 81.58mm, Depth: 59.60mm, Width: 33.27mm</p><p>&nbsp;</p><figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/173111/rich_content/fca2fce8-bd9c-4317-849a-6f41b23cadd3/img_20220507_085158649_hdr.jpg#%7B%22uuid%22%3A%22e8b35e27-19a9-455a-9c5e-cd7ede4517f8%22%2C%22w%22%3A2173%2C%22h%22%3A2468%7D"></figure><p>&nbsp;</p><p><strong>Print Instructions:</strong></p><p>I printed these at a layer height of 0.20mm with a 5% infill.&nbsp;</p><p>&nbsp;</p><p><strong>Build Instructions:</strong></p><p>I have included a test piece of just one tin section for the tray, if your desired tin doesn't fit the model you can make adjustments in the included CAD files.</p><p>You will need a little super glue to attach the legs to the trays. &nbsp;After curing the glue for a minute or so while holding the leg to the shelf you can let it completely cure with tins on the shelf for full weight to help the glue bind.</p><p>&nbsp;</p><p><strong>How I made this:</strong></p><p>I made this in FreeCAD with the help of the Honeycomb macro for the legs. &nbsp;I made this model mostly parametric for ease of use. &nbsp;I had some issues with the linear pattern function for the indents of the tins so you will have to modify the distance for those manually.</p><p>I have included the FreeCAD files if you would like to modify anything. &nbsp;The honeycomb macro is located at this link: https://wiki.freecadweb.org/Macro_Honeycomb</p><p>&nbsp;</p>