simple Servo Signal Generator / Analyzer
prusaprinters
This is a simple Servo Signal Generator / Analyzer using an Arduino Nano and a DIP204-4 LCD. The Output provides a Servo Signal Pulse with 20ms Period. Arduino Source Code is also provided. The Pulse Width can be controlled via Poti either between 800-2200us oder 1000.2000us. You can directly connect a servo to the Output. This Range is selected with one of two Buttons. The other Button switches LCD Backlight on/off. The input analyzes the Signal from an RC receiver. The percentage values depend on the selected Range. I used a 2.54mm THT PCB manually wired according the attached schematic. Unfortunately the DIP204 LCD has a 2.00mm grid, so it needs some effort to connect it. The attached PDF files can suport the wiring. Input and Output Connectors are doubled so that at least on could be used for supply of 5V. You may want to integrate an internal battery. In this case you need to modify the Case. Category: Electronics
With this file you will be able to print simple Servo Signal Generator / Analyzer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on simple Servo Signal Generator / Analyzer.