Simple scarecrow

prusaprinters

<p>The scarecrow is powered by the wind and scares away birds and moles in the garden or just birds from the balcony. This scarecrow produces a slight vibrations that are transmitted in the ground and these vibrations scare the moles away.</p><p>You can use for hanging the scarecrow (ScareBody) a round metal rod with a recommended minimal height 280mm, diameter from 6mm to 11mm and rounded top for better rotation, or you can print it from two or three parts (if you can get it taller). The individual parts of the printed stick (ScareUpperStick, ScareMiddleStick, ScareBottomStick) will simply connect together as shown in the second picture, gluing is not necessary. Just be careful when connecting the ScareMiddleStick and ScareBottomStick parts, they must have the flat spikes in the same direction.</p><h5>Dimensions of parts</h5><p><strong>ScareBody:</strong> 160mm × 200mm × 200mm<br><strong>ScareUpperStick:</strong> 60mm × 6mm × 6mm<br><strong>ScareMiddleStick:</strong> 280mm × 8mm × 8mm<br><strong>ScareBottomStick:</strong> 280mm × 10.4mm × 10.4mm</p><p><strong>Height of assembled model: </strong>530.5mm</p><p>&nbsp;</p><h3>Print instructions</h3><p>Printer: Prusa i3 MK3S<br>Filament: Prusament PETG</p><h5>ScareBody</h5><p>Rafts: No<br>Supports: No<br>Resolution: 0.30 DRAFT<br>Fill density: 100%<br>Fill pattern: Rectilinear</p><h5>ScareUpperStick</h5><p>Brim width: 5mm<br>Supports: No<br>Resolution: 0.30 DRAFT<br>Fill density: 100%<br>Fill pattern: Rectilinear</p><h5>ScareMiddleStick</h5><p>Rafts: No<br>Supports: No<br>Detect bridging perimeters: true<br>Resolution: 0.30 DRAFT<br>Fill density: 30%<br>Fill pattern: Gyroid</p><h5>ScareBottomStick</h5><p>Rafts: No<br>Supports: No<br>Detect bridging perimeters: true<br>Resolution: 0.30 DRAFT<br>Fill density: 30%<br>Fill pattern: Gyroid</p><p>&nbsp;</p><p><i>Just print and enjoy it.</i></p>