Simple Nerf Rail Torch Mount

prusaprinters

<h3>Simple torch mount for Nerf Elite Rails</h3><p>This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops.</p><p>This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops. Parts needed are:</p><ul><li>2 or 3 Cable Ties</li><li>M3 Bolt 25mm long</li><li>M3 Nut</li><li>Torch</li><li>Nerf gun</li></ul><h4><strong>How does it work?</strong></h4><p>The hole takes a M3 bolt through it and is designed to sit in the dips/divots on the Nerf Rail. This prevents the attachment from falling off. The 3 holes on the side are for cable ties to hold the torch in place.</p><h5><strong>Please note that this only works with Elite Rails and has only been tested on a Stryfe.</strong></h5><p>This is designed to print without supports upright, which also allows for the greatest strength for holding the torch.</p><h4><strong>What are the files?</strong></h4><p>There are 2 files with this, marked Tight and Loose. This is to take into account painted and unpainted Nerf guns. If you have a painted Nerf gun, select Loose. Unpainted takes Tight. I do not give any guarantees that it won't scratch off paint, use at your own risk. The differences are also marked on the model with a small 'T' or 'L' on one end.</p><h4><strong>Can I sell this?</strong></h4><p>Sure! Let me know how well it sells!</p>