Simple Male Masturbator, for silicone molding

cults3d

If you download a free model, consider showing your appreciation by donating to the creator's tip jar at https://www.buymeacoffee.com/d3dpublic. Please use protection when handling this product: a condom is recommended. For any custom design requests, send an email to didicults3d@gmail.com. Here are some recommended sex toys: * A high-quality vibrator can be found here: http://ali.pub/4jxtc9 * For a realistic dildo experience, check out this link: http://ali.pub/4loasq * If you're looking for the most lifelike dildo on the market, visit this website: http://ali.pub/4lob0b * If you prefer a dildo with ejaculation capabilities, take a look at this product: http://ali.pub/4lobjk For a simple male masturbator, consider the following options: #MOLD PRINTING OPTIONS #OPT1 MOLD SETTINGS: Material: ABS plastic Nozzle temperature: 240-255°C Heat bed temperature: 95-105°C Layer height: 0.10-0.20 mm Infill percentage: 20-30% Shell thickness: 2-3 layers Raft or brim settings depend on your printer model. Finishing touches before molding: 1. Remove excess material, supports, and sand the surface. Option 1 for a smooth finish: Use food-grade silicone. Option 2 for an ABS slurry finish: Apply a thin layer of ABS slurry. #OPT2 MOLD SETTINGS: Material: PLA plastic Nozzle temperature: 180-220°C Heat bed temperature: 50-60°C Layer height: 0.10-0.20 mm Infill percentage: 20-30% Shell thickness: 2-3 layers Raft or brim settings depend on your printer model. Finishing touches before molding: 1. Remove excess material, supports, and sand the surface. Option 1 for a smooth finish: Use food-grade silicone. Option 2 for a spray primer finish: Apply a thin layer of spray primer. #CASTING PROCESS Mold Material Recommendation: We recommend using food-grade silicone or 00-20 silicone for added safety during skin contact. Always use protection, such as a condom, when handling this product. Use at your own risk.