Simple garden spike

prusaprinters

<p>A simple, yet effective garden spike to write the name of the plant on.</p><p>&nbsp;</p><p>I found that 1.2mm is a good width to make the spikes strong, yet flexible. Adjust as you like.</p><p>You can print about 10 spikes in 1:20 with a layer hight of 0.20mm.</p><p>&nbsp;</p><p>Make sure to print it in PET-G to make sure the sun has a minimal effect on the plastic, PLA might become brittle over time. Also print it in a bright color to make it easy to spot, this will also prevent you from losing the plastic pieces in your garden.</p><p>&nbsp;</p><p>Let me know if you want other dimensions or if you have any other suggestions and I see what I can do.</p><p>Some people have asked me for a Paypal donation link: paypal.me/jahtimojah</p><h3><strong>Print instructions</strong></h3><p>Print with your own settings to get a reference chart that compares to your printer.</p><p>My prints are printed with a 0.4mm nozzle and 0.32mm layer height.</p>