Simple Dog Bag Bin

cults3d

Quick Prints // Dog Bag Bin Purchase from BWD Shop Tired of forgetting to bring a few dog bags on your walk? This simple model attaches securely to your fence with two #7 x 1" wood screws. I also designed a small clip on the bottom for spare loose bags. This model is specifically made for Earth Rated bags, but it should accommodate any bag that meets the following specs. If your bag doesn't fit this, don't worry - the base IPT (Inventor) and STEP files are included so you can adjust the model as needed. Bag spool dimensions: 7mm ID, 30mm OD, 65mm height To print one of these on a single or multi-material printer: Download. There are several options available: 1x DogBag_cap.stl 1x DogBag_base.stl "DogBag_base.stl" includes modeled-in supports as part of the base model. "DogBag_base.3mf" includes modeled-in supports as a second mesh. "DogBag_baseNoSupports.stl" does not include any supports. As mentioned, IPT (Inventor) and STEP files are included for customization. Import the cap and body files into your slicer. Slice. The model-in supports are optimized for a 0.200mm layer height. With the ".3mf" file, you can use the support meshes as support enforcers if you prefer. If your printer has challenges with overhangs, download the model without supports and enable your favorite support settings. Print. I used Prusament PLA in Pearl Mousse. Install. Use two #7 x 1" wood screws after removing supports. The screws should be lined up 50mm apart. That's it for this quick print. Hopefully you could understand my instructions, because I wrote them with clarity in mind.