Simple CR10 Brace Mod
thingiverse
<b>Description:</b> This mod is a straightforward design for attaching braces to the CR10. The brackets holding the brace in place slide into the vslot railing and fit snugly without needing additional screws, except for the threaded post itself. You will need to print two of each type of bracket. Then, you'll add one of each bracket type to each threaded post and secure them with a nylon locking nut on either side of the bracket. Some adjustment will be necessary to get the brackets in just the right position to fit on the printer perfectly. The vslot rail by somaraok, listed under the remix, was used in this print to help achieve the shape for the brackets to slide into the vslot railing. <b>Materials:</b> 1/4 inch threaded post 24 inches long - 2 pieces 1/4 inch nylon lock nut - 8 pieces <b>Print Details:</b> Filament: High-quality PLA + Infill: 25% density Layer Height: 0.3 millimeters Support: None required
With this file you will be able to print Simple CR10 Brace Mod with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Simple CR10 Brace Mod.