Simple Christmas Tree Lamp

prusaprinters

Simple, easy to print and easy to assemble christmas tree lamp. With the right filaments you can get a pretty nice glowing effect. I would recommend printing and assembling everything and leave the balls to be glued last. Turn on the lamp and try your filaments to see which one works best. Mine is printed with: Fillamentum PLA Extrafill green grass (Tree). Sunlu PLA+ white (Snow rings). 3DE Premium PLA silky gold (Star). FFF Baobab (Plant pot and lamp holder). Sunlu PLA+ red (balls). Fillamentum PLA Extrafill Melon Yellow (balls). Fillamentum PLA Extrafill Crystal Clear Iceland Blue (Blue). Additional parts required: x5 M3x10 screw. x4 6x2 mm magnet. Candle light bulb E14 (I used ikea Ryet 200lm). E14 light socket ( 28mm diameter max). For reference I used this one: https://www.leroymerlin.es/fp/19712035/portalamparas-e14-termoplastico.electricidad_clavijas-ladrones-casquillos_casquillos Cable whatever lenght you see fit. Power plug. Despite the required hardware it is quite easy to assemble. Size: 236 x 113 x 113 (mm). Print instructionsI printed the tree with the usual 2 perimeters and even tough the light bulb is only 200lm it went trough. I had to paint the interior black and then silver for reflectance. I would go with probably 4 perimeters to avoid this. So: 4 perimeters for Simple Christmas Tree_Tree-6x2mm.stl 0.1 layer height for the balls. Don't glue the star before the snow rings.