Simple Case for SKR 1.3 Remix

prusaprinters

<p>I really liked the design idea Borsh came up with, but for me it had a couple of problems. First, the tabs in the lid were way too flimsy and broke very easily with PLA. Second his punch outs weren't working for me. Also, I wanted 4 tabs on the bottom so it could be mounted under an enclosure.</p> <p>I ended up recreating the box from scratch in Fusion 360. I added my 4 tabs and made some other minor changes. You will need to print the bottom with Support turned on, I set mine to 60 degree overhang and in Cura 4.2.1 they popped out pretty easily. The hexagonal holes for the nuts on the bottom are slightly too small (by design) for M3 nuts, so place the nut over the hole in the proper orientation then put a hot soldering iron in the hole in the nut and press down and it will sink into the hole and be solid. I printed the box in PLA at 25% infill.</p> <p>The lid I loaded into Meshmixer and beefed up the tabs that clip into the box and I also trimmed down the height of the air channel as it was hitting my board when it was mounted. I printed the lid in PLA with 50% infill.</p> <p>Thanks to Borsh for the creative design!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>25%-50%</p></div> <p><strong>Filament:</strong> El Cheapo PLA</p> </p></p></p> Category: 3D Printing