Simple Case for SKR 1.3 Remix

thingiverse

I really loved the original design idea that Borsh came up with, but unfortunately, it had a couple of major flaws for me. First and foremost, the tabs on the lid were alarmingly flimsy and broke extremely easily when printed with PLA. Second, his punch outs weren't functioning properly for me at all. Moreover, I wanted to add four tabs to the bottom so that it could be securely mounted under an enclosure. In the end, I ended up completely redoing the box from scratch in Fusion 360. I added my four required tabs and made some other minor tweaks as well. You will need to print the bottom with Support enabled, I set mine to a 60-degree overhang and in Cura 4.2.1 they popped out very easily indeed. The hexagonal holes for the nuts on the bottom are slightly too small (as designed) for M3 nuts, so place the nut over the hole in the correct orientation then carefully insert a hot soldering iron into the hole of the nut and press down firmly - it will sink into the hole and be solid. I printed the box in PLA with 25% infill. The lid I loaded into Meshmixer and significantly reinforced the tabs that clip into the box, also trimming down the height of the air channel as it was hitting my board when it was mounted. I printed the lid in PLA with 50% infill. I'd like to extend my gratitude to Borsh for his creative design efforts!