Simple Arca clamp mount

prusaprinters

<p>This is a simple clamp for Arca-style mounts. It's 3D-printed plastic, so I wouldn't rely on it for expensive or heavy camera setups, but for just having a quick way to use Arca-style mounts to hold a smart phone or other small devices it seems to do the trick.</p> <p>It has a 1/4"-20 threaded hole for mounting to a standard camera tripod, and uses an M5x16 thumb screw for the clamping operation. (Many GoPro-style thumbscrews work very well for this.)</p> <p>At some point I might also add a 3-D printed thumbscrew to the model so a complete unit can be printed, but so far I've had plenty of machined screws so have been sticking with that.</p> <h3>Print instructions</h3><p>Printed in PETG with a 0.2mm layer height, 10% infill, and 3 perimeter walls. For a stronger mount I suggest increasing the number of perimeter walls and/or the infill.</p> <p>No supports are needed.</p> <p>Use a M5x16 thumbscrew to attach the clamp to the base of the mount and tighten as needed.</p>