
SimJack TT25 Dayton Transducer Mod
thingiverse
Print 2x TTop to mount to your Dayton transducers.Print 1 middle mount for your brake.Print 1 Middle mount for your gas.Check the width measurements for your middle mount as the Gas might be too thin. It'll still work just fine.Instructions:Unscrew the top 6mm bolts from your pedal and remove the inserts.Check fit for the middle pieces.Attach Transducers to the TTop using supplied screws.Attach TTop to the Middle mount (One 5x30mm bolt through the top. One Drywall screw to mount to the bottom (I couldn't get the measurements exactly, so just drill a small pilot hole when aligned and then go straight in.Mount the completed piece to the Pedals -- the 6mm bolts will thread into the middle mount securely.
With this file you will be able to print SimJack TT25 Dayton Transducer Mod with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SimJack TT25 Dayton Transducer Mod.