Simchair MKIII cyclic gimbal v2 I2C

thingiverse

IMPORTANT! PLEASE USE LATEST FILES FROM GITHUB: https://github.com/hc625ma/simchair_models/tree/master/Components/Peripherals/Flight%20stick%20gimbal Visit http://hc625ma.org for latest news and manuals! While this gimbal is perfectly fine if you don't need stick centering, I strongly suggest using this version instead, with springs and the corresponding force trim mode: http://hc625ma.org/flight-stick-gimbal-608zz-reinforced/ This is an improved cyclic gimbal for the Simchair MKIII. It is quite similar to v1 (https://www.thingiverse.com/thing:2795753) except for added mechanical calibration capability and completely changed electronics. It uses an ADS1115 16-Bit ADC for its axes and connects to a new Arduino Leonardo powered master controller through i2c. Of course, it can still be used with an UnoJoy based controller, but I recommend switching to a Leo powered one (will be released soon). B8 stick that was a part of the v1 package is now fully functional and has moved to a separate package (https://www.thingiverse.com/thing:2918906) IKEA GUNDE CHAIR (optional): http://www.ikea.com/us/en/catalog/products/00217797/ simchair IKEA GUNDE frame (optional): https://www.thingiverse.com/thing:2795691 2 x SS495A hall sensor 2 x 6x6x4mm square magnet 4 x 3x12mm screws and nyloc nuts to connect the frame to its enclosure 2 x 3x25mm screw for lever connector axis strengthening 2 x 3x20 m3 screws for magnet holders 4 x M8x85 bolts, spring washers, and nuts 4 x 608 bearings (standard skateboard bearings) Cyanacrylate to glue SS495A's and their wires to their mounting spots 1 x Simchair MKIII I2C controller (https://www.thingiverse.com/thing:2919692) 1 x ADS1115 16 bit ADC Check out an assembly manual at http://hc625ma.org/cyclic-gimbal/, more interesting stuff to come!