Sillites Outlet Cover (Modified with Chamfer, thinner)

thingiverse

This is a modification to the cover/plug for the Sillites single outlet. The outlet comes with a white cover but it prone to breaking and could be more tight-fitting / less obtrusive. Dimensions are in mm.The main difference here is that the plate thickness is reduced to 1.2mm to match the stock cover. In addition the "lip" is lowered in height to 3mm so it will sit flush when the outlet is mounted. Finally a the prongs are reinforced with a chamfer to the main plate for strength, which matches the imprinted chamfer of the outlet holes.I used PLA for this print which was sufficient for this application. Note that the short nubs from the original Thing were too short and would not hold in place when the outlet was mounted vertically (or upside-down). Probably easier to just print the prongs full size and clip them down via trial and error.