Silica Gel Tray/Container With Lid For Wall Mounted Drybox

prusaprinters

I suggest to print lid with 99,6% scale, for me 100% too large…For creality print slicer (to print lid):Shell → Wall line count = 5Shell → Top layers → 0Shell → Bottom layers → 050% Grid infill and No Bottom/Top Layers!I used to use a container that fits into the center of the spool, but they kept falling on the floor and breaking. This solution is much more convenient for me.PS. Print this container with temp-resistance filament and you will be able to dry silica gel right in the box.  Just put to dehidrator with 70-90C temp for 1-2 hours and you can use them again.Thanks Zwackelmann for interesting idea to print lid grid with standard slicer infill. Original information:This is a Silica Gel Box for the Wall Mounted Drybox https://www.prusaprinters.org/de/prints/4605-wall-mounted-drybox-with-sensorThis is a remix from the silica gel box from PaintX (Thanks! Very useful design!), i simply added a lid to avoid the silica gel falling out when handling the box :)Print: 50% Grid infill and No Bottom/Top Layers!