Silica gel boxes with snap-on lid (parametric)
prusaprinters
<p>My take on a silica gel container using honeycomb infill for the top and bottom of the model to get a nice grid of holes.</p> <p>I've included files for the large (180x100x25mm) and small (60x60x15mm) box.</p> <p>Was inspired by <a href="https://www.prusaprinters.org/prints/3253-silica-holder">https://www.prusaprinters.org/prints/3253-silica-holder</a></p> <h3>Print instructions</h3><p><strong>Important</strong> if you need to re-slice the model, the honeycomb pattern is produced in PrusaSlicer by using the following settings:</p> <ul> <li>Layers and perimeters > Perimeters = 4</li> <li>Layers and perimeters > Solid layers Top = 0 Bottom = 0</li> <li>Infill > Fill density = 30% (controls the size of the honeycomb cells)</li> <li>Fill pattern > Honeycomb</li> </ul> <p>Model uses thin walls that are the correct size for 0.3mm layer height to avoid any gap-fill.</p> <p>The FreeCAD model is parametric. If you open it with FreeCAD (I used v0.18.4) then you can edit the Params spreadsheet to change the size of the box. Then, select the box and lid and export them as STLs.</p>
With this file you will be able to print Silica gel boxes with snap-on lid (parametric) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Silica gel boxes with snap-on lid (parametric).