Sigma Lens Hood - LH780-06

thingiverse

12th May 2020 EDIT: I've updated the design with a V3, which should be easier to mount in reverse now. The design is also slightly flatter, so when mounted, it won't lift the lens and body (D7100) off a flat surface, keeping the lens parallel to the surface. 19th June 2020 EDIT: I've updated the design with a V4, which now resembles the original LH780-06 more closely, featuring knurling around the grip area. Designed specifically for the Sigma 18-35mm f/1.8 lens, this product is based on the LH780-06. It will likely fit any Sigma lens that meets these criteria: -> Has a minimum focal length of 18mm -> Features a 72mm filter thread To reflect heat and prevent PLA melting, I painted the outside white and the inside matte black. For optimal printing results and speed, follow these guidelines: - From 0 to 3.30mm, use a layer height of 0.05mm. - From 3.30 to 5.60mm, switch to a layer height of 0.1mm. - For the remaining portion, from 5.60mm to 49mm, use a layer height of 0.22mm. - Finally, for any printing above 49mm, return to a layer height of 0.1mm.