Sidewinder X1 Drag chain

thingiverse

Human: Made to work with this drag chain:\r\nhttps://grabcad.com/library/cable-drag-chain-wire-10x15mm-1\r\nYou will only need 1 meter of drag chain to complete this project.\r\n\r\nThe x-axis v-slot extrusion features two large holes. My designs do not obstruct these, in case you want to pass cabling to the other side.\r\n\r\nThe extruder cover has three M3 holes for easy mounting of accessories later on.\r\n\r\nStock filament sensor cabling cannot reach the extruder through the drag chains, so this configuration is not supported.\r\n\r\n###Bolts and nuts:\r\n2 x M3 10mm bolts to hold the drag chain on 'x1'\r\n2 x M3 10mm bolts to secure the 'z' stepper motor\r\n4 x M3 >=12mm bolts for holding the drag chain on 'extruder' and 'x2'\r\n2 x M3 >=14mm bolts for securing the drag chain on 'z'\r\n8 x M3 lock-nuts\r\n8 x M3 washers (optional)\r\n4 to 8 x zip-ties\r\n\r\n###Printing Notes:\r\n* You may need to rotate the x1.stl and x2.stl files for optimal printing.\r\n\r\n\r\n###Installation notes:\r\n* Part installation order does not matter.\r\n* Remove the spool holder and find an alternative mounting solution for your spools.\r\n* For the x-axis pieces, use bolts and nuts from the spool holder.\r\n* When homing for the first time with a Bltouch sensor, place an empty cardboard box over your printing bed. If the sensor activates after the nozzle touches the cardboard, add a couple of spacers to the Bltouch mount.