Sidekick64 Cartridge Case: Lower part optimized for print with less supports
prusaprinters
This is a remix of the lower part of the Sidekick64 Cartridge Case by bigby. The bottom part is divided into two parts to avoid supports and thus get a better surface.The parts can be easily put together without the need for additional screws or glue.After inserting the boards and closing the case with the upper case part, everything stays in place. This is only the lower part of the case! Upper part can be found here: https://www.printables.com/de/model/122968-sidekick64-cartridge-casePlease note the license for this design! It does NOT allow for commercial use.This case is designed to fit version 0.41 of the Sidekick64 cartridge for the Commodore 64 and a Raspberry Pi 3B+.Additional material required for complete device:4 screws M2.5x20, flat head4 nuts M2.51 Raspberry Pi 3 B+1 Sidekick64 PCB, assembledupper case part Print SettingsRafts:NoSupports: Not necessarily. I printed my test prints with cheap filament that is not well suited for bridges. With good filament and correct printsettings I think no supports are necessary. Resolution: 0.2mm Notes: Print bigger case part with the outside facing down on the bed.The small part has to be printed upright.See Photos.
With this file you will be able to print Sidekick64 Cartridge Case: Lower part optimized for print with less supports with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sidekick64 Cartridge Case: Lower part optimized for print with less supports.