Side Mounted XYZ Davinci Ball Bearing Filament Spool Carrier with Friction Plate

thingiverse

This is a superior filament holder designed specifically for the XYZ DaVinci printer. The base plate easily snaps into place in one of your machine's side panels. A robust system featuring two half-inch ball bearings and a sturdy bolt securely fastens the spool carrier to the base plate. A specialized friction plate with an adjustable spring ensures a consistent level of tension on the filament, keeping it perfectly in place while feeding smoothly through the printer's mechanics. This ingenious holder was designed with compatibility in mind for MakerBot brand filament reels but will also work effectively with most other models available today. An accompanying step file allows users to easily modify the design as needed. **Important Parts:** - 4.5-Inch Long Half-Inch Hex Head Bolt - One-Half Inch Wide Spring by Half Inch Long - (Two) Half-Inch Diameter by 1.125 Inches Outer Diameter by .375 Inches Width Ball Bearings (Available at McMaster Carr) Installation Instructions: 1. First, carefully drive the half-inch bolt through the back of the base plate, seating it in its hexagonal recess. 2. Locate the window opening on your XYZ DaVinci printer and fit the base plate securely inside, aligning it with the other components. 3. Gently insert each ball bearing into an end of the carrier shaft. 4. Next, thread the shaft onto the filament reel, taking care not to overtighten. 5. Place this assembly over the bolt in such a manner that the rounded face of the spool remains visible. 6. Now add your adjustable spring, making sure it's fully seated against the bearing, followed by your half-inch nut or wing nut. 7. Adjust and secure this system according to the desired tension when rotating the reel; just remember, some adjustments will need more fine-tuning.