Siberian Husky - Lithophane

thingiverse

Here is a lithophane for a Siberian Husky. I am now uploading two versions. - No Base: It has a 3mm thickness and a 3mm border around it. I have had issues with my print not staying stable and wobbling a bit towards the top of the print. - Has Base: It has a 3mm thickness and a 3mm border around it. Add a base of 7mm which makes the total base of 3mm (thickness) + 7mm (base added) = 10mm The inclusion of a base offers several benefits: - A more stable print towards the top - It now stands freely, allowing you to place it by any window - You can add your contact information at the bottom of the base without affecting the image My printing dimensions are as follows: - The height is 75% of the width Thus, if the width is 120mm, then I use a height of 90mm - I prefer to print my pictures standing up; it looks better in my opinion. I tried printing an image flat once and was disappointed with the result. I won't be trying that again. - I recommend using 100% infill to minimize air gaps as much as possible, since you don't use much material anyway - You should use a brim to print this; I found a raft didn't work because the image is tall and the print couldn't stand up straight I am the owner of https://www.neocrisis.com