Shrieker 130 Runcam Split/Mini Mount

thingiverse

Update: I've added the "B" Version with slightly larger gaps between the cam lens and mounting post, as well as a slightly smaller inner diameter for the mounting post. This is because some standoffs are barely thinner than others. ________________________ Update: A "short" version has been added, offering more variable height adjustments with intentional gaps to prevent camera lens or body contact with columns. This reduces vibrations while being much lighter and faster to print, albeit requiring a minor amount of support material. ________________________ This is a basic 30° Mount designed for the Shrieker to work seamlessly with a Runcam Split or Mini. The goal was to position the camera as high up as possible, minimizing visible propellers in the image. Use M2x3mm screws (M2x4mm may also be acceptable, but ensure they're not screwed in too far). Print in TPU for added damping against vibrations.