Shower Head Holder | Duschbrause Halter

thingiverse

Shower Head Holder printed with 110mm/s and 30% Honeycomb Infill. Outer Perimeter with 90mm/s. You can print however you want. Strong and tight I use 3mm PETG Filament. Designed with Inventor 2014 because my old one was broken. The old one had two screws. I used the old hole for the new one to avoid drilling more holes. On the backside, I put some double-sided tape and used only one screw. If you need it with two holes for the screws, just drop me a message on Thingiverse. The hole for the Shower Head is about 16 mm. You can scale it if needed. Have fun! Duschbrause Halter Gedruckt mit 170mm/s 30% Honeycomb Infill. PETG was used because it's very stable. Outer contours were printed with 90mm/s. You're free to print it however you like. Super strong and tight. I use 3mm PETG Filament. The design was made with Inventor 2014 since my old Shower Head holder broke. I also used double-sided tape on the backside, using only one screw. If you need one with two holes for the screws, just let me know on Thingiverse and I'll make it longer. The hole for the Duschbrause is about 16mm. You can scale it as needed. Netfabb Basic is a nice tool to rescale STL files. Have fun printing! Print Settings Printer: ripbot Rafts: Doesn't Matter Supports: No Resolution: 0.25 Infill: 30% Post-Printing Step one: Print it Step two: Use it Step three: Enjoy it How I Designed This 1x dowel 1x Spax screw or something you can find at home 1x double-sided tape 1x Dübel 1x Spax Schraube or something you have handy