shoulder rig

thingiverse

One thing to note is that this set not only fits the Canon 5D, but also other cameras, and all you need to change is the quick release Plate(Clamp), redesign a plate, and decrease the Raised. Most importantly, they can all be adjusted. The most significant difference between shoulder rigs on sale and mine lies in the diameter of the two rods. Mine uses 12mm carbon fiber pipe, not 15mm aluminum pipe. I added an extra 0.4mm tolerance to most diameters, so if you're assembling printing parts and feeling a bit loose for the rod, maybe you need some glue. Most of the printing parts were printed by the Overlord 3D printer made by the Dreammaker team, and the bigger one (TopHandleConnecter) was printed by Prsim, also from Dreammaker. Their previous generation 3D printer is quite impressive. I've put together a set of pictures that show how to assemble with screws. The shoulder_Carrier_Connecter part should be printed twice for added strength. P.S.: There will be at least three carbon fiber boards for the Lens Hood, and I'll publish the CAD file later. Maybe I can even shoot some great videos (I've already done it). And here's a link to the worm gear: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.NGtbdA&id=17352109451&_u=765kgh64ed9 I'm not sure if you guys can open and buy it, but I'll try my best to help. The rod that the worm gear needs is 4mm&6mm (if you buy it, you might need to get more). You can also find it at the same place, and here's the link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.NGtbdA&id=45114001387&_u=765kgh6babe Print Settings: Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 40