Short Low-Profile Tool Tray for Watchmaker's Bench

prusaprinters

<p>This tray is designed for easy deployment across a multitude of watchmaking and jewelry-making bench styles. &nbsp;Can fit inside most side-drawers or be laid across in series within deeper/wider drawers to quickly organize items. &nbsp;And of course, this makes a useful organizer for tools on the benchtop surface. &nbsp;</p><p>The overall dimensions are 200mm (L) x 200mm (W) x 15mm (H). &nbsp;The long compartments are designed to hold items such as tweezers, pegwood sticks, barrel arbor holders, hand levers, etc. &nbsp;The smaller compartments can accommodate dip oilers and other short-handled tools. &nbsp;The wide compartment at the top is good for miscellaneous tools. &nbsp;The tray is quite rigid and will resist flexing even with heavy tools in place. &nbsp;Slight bevels and contours around the corners allow for easy dropping-in and picking-up of items. &nbsp;</p><p>This tray was tested on the Prusa i3 MK3S+ with 0.40mm nozzle at both 0.10mm, 0.15mm, and 0.30mm layer heights. &nbsp;Variable layer heights can be used to achieve a nicer finish around the contoured areas. &nbsp;Ironing can also be done on the bottom layer for the compartments (not recommended for the topmost layer). &nbsp;</p><p>If you have trouble with warping and see the corners of the tray lift-off from the printbed, I recommend applying a glue-stick layer to improve adhesion. &nbsp;You may also use a brim/skirt. &nbsp;</p><p>The blue tray in the photos was printed using Prusament Azure Blue PLA. &nbsp;</p>