Shop Towel Pegboard Mount (Quick Load)

prusaprinters

<p>This model is a fully printable shop towel pegboard mount with a quick load function for ease of use (and tactical towel reloads, of course). No dowel rods required! Fits a standard 1" x 1" pegboard, and can be removed/adjusted as needed.</p><h3>Loading Mechanism In Action</h3><figure class="media"><oembed url="https://youtu.be/XBgCcq-xFTw"></oembed></figure><h3>Printing</h3><p>The model is split into several pieces for strength/printability, and can be printed all at once or separately if you prefer to mix filament colors.</p><p>Supports will be needed for the <strong>MountPartA</strong> pegboard hooks, however the rest will print fine without any at all. The .3mf file <strong>PegboardTowelMount_allParts</strong> will also display preferred orientation for each piece.</p><p>This model works perfectly fine printed in PLA!</p><h3>Assembly</h3><ol><li>Attach <strong>MountPartA </strong>to <strong>MountPartB </strong>via the dovetail joint. Refer to pictures to confirm orientation. Note: this piece is designed as a friction fit. Depending on your printer's tolerances, the pieces may need additional post processing.<br>&nbsp;</li><li>Place the corresponding <strong>Hook</strong> over the mount, and secure with one Thumbscrew by screwing into <strong>MountPartB</strong>.<br>&nbsp;</li><li>Repeat steps 1 - 2 for the other side, and you are done!</li></ol>