Shock Spacers for the Traxxas 1/16 E-Revo/summit/slash

thingiverse

I designed this part specifically for my 1/16 E-Revos Shocks, as I encountered a problem with the spring set I had ordered - the black springs were shorter in length than expected. This resulted in the need to adjust the spring all the way down, eventually running out of thread on the shocks. To solve this issue and eliminate the sag at the rear of my vehicle, I created these spacers that can be 3D printed at a hobby shop. To use these spacers, you'll need to download them, but keep in mind that some sanding will be required - particularly where I used the Dremel inside one of the spacers to remove excess material. This process makes it easier for the spacer to slide onto the shocks themselves. You can see how this is done by looking at the photos I've included, which also show you how to remove the shocks and install the spacers on them. With a bit of practice, you should be able to get the hang of it.