Shifter Knob for 99 Ford F-150 with Manual Transmission

thingiverse

Manual transmission knob shifter knob to fit my 1999 Ford F-150. Notes for printing: This part contains internal geometry that allows the press-fit section to flex without cracking. I successfully printed it without support on a Prusa MK3S+ in Hatchbox PLA vertically, knob-up shaft down by adding a 10mm brim to prevent the part from popping loose from the print bed at 20% infill and all other settings default. Creative Commons Attribution license, so please take and modify it as you see fit. The Fusion 360 f3d file is attached. If you want a couple of ideas for remixes, here are some I thought up. * Splice the internal geometry onto a happy octopus for an octo-knob * cut in or multi-material the shift pattern into the top * inset the top to hold a pretty coin This was a perfect light press fit as printed for me, a little bit snug but easily able to tap it in place by hand. If your printer makes tighter or looser holes, you may have to print it undersize or oversize for a good fit.